It’s hotter than blazes in the High Point area, and you’re probably running your air conditioner 24/7. Depending on the age of the air conditioner and how well it’s been maintained, you may experience common A/C problems this summer. Some problems are a simple fix, while others require the expertise of an HVAC professional. Here’s an overview of five common A/C problems and what you can do to remedy them.
Frozen Indoor Coil
If the evaporator coil in the indoor unit freezes up, you may have an airflow problem or a refrigerant leak. Turn the A/C completely off and allow the ice to melt. Meanwhile, inspect your system for possible airflow restrictions:
- Check the air filter. A dirty filter restricts airflow and allows dust to build up on the cooling coil, which interferes with heat transfer and can ultimately damage the fans and compressor. If your filter is dirty, replace it with a clean one before turning the A/C back on.
- Check the return registers. These are the vents that don’t blow air, but rather bring air back into the equipment for conditioning. Remove obstructions like furniture, drapes or rugs from around the return registers.
- Check your ducts. Make sure they are free from problems like kinks or collapsed sections. Check the seals between duct sections to ensure air isn’t escaping before it gets to the registers.
Turn the A/C back on once the coil has thawed and obstructions have been removed. If there are no airflow obstructions, you likely have a refrigerant leak, which must be addressed by a licensed and qualified professional.
Electric Control Failure
If a component of your air conditioner stops working, such as the outdoor or indoor fan or outdoor condenser, the likely culprit probably has to do with the electric control of the system. Unfortunately, this probably isn’t something you can fix yourself.
Over time, the electrical controls that run the major components of the system can wear out or become corroded. Electrical connections also loosen over time, and terminals and wires become corroded. Call your trusted HVAC professional for a thorough exam of the electrical controls of the system.
Condensate Drain Clogs
During periods of high humidity, condensation drips from the evaporator coil in the indoor unit and is collected in the condensate pan beneath. A plastic tube leads from the pan to an indoor or outdoor drain. If the pan or the drain becomes clogged with debris, the water in the condensate pan will back up and, as a safety precaution, shut down your system.
Bail out the water in the pan and check the drain for debris. Check the terminal end of the drain tube as well, especially if it’s located outdoors. If you don’t see any clogs, get a piece of smaller flexible tubing and run it through the drain tube from end to end.
A dirty air filter can result in a number of common A/C problems:
- Dust buildup on the evaporator coil due to a clogged air filter prevents the optimum absorption of heat and reduces airflow.
- Dust buildup on other essential components like the fan and compressor can result in damage and premature failure.
- Restricted airflow caused by a dirty filter can overheat the system, causing damage and even shutting it down.
Inspect the air filter every month and replace it when it’s caked with dust.
Preventing Common A/C Problems
Annual preventive A/C maintenance will go a long way toward preventing all of these common A/C problems and more. A yearly tune-up extends the operating life of your system, increases efficiency to save you money on cooling costs, and reduces harmful emissions to lower your carbon footprint. While early spring is the ideal time to have your system tuned up, it’s highly beneficial no matter what time of year you schedule it.
For more expert advice about common A/C problems, or to schedule your annual tune-up to prevent them, please contact us in the High Point and Winston-Salem areas at Logan Heating, Air Conditioning & Electric.
Image Provided by Shutterstock.com